Tlhaloso: PVC End Cap

Tlhaloso e Khutšoanyane:

Sekoahelo sa ho qetela sa pipe ea PVC se entsoe ka boqhetseke ho phethahatsa mosebetsi oa bohlokoa oa ho tiisa lipheletsong tsa liphaephe ka mokhoa o sireletsehileng.Sena se etsa bonnete ba hore maro a ka har'a lipeipi a lula a tiile, ho thibela tahlehelo ka lebaka la ho lutla le ho sireletsa khahlanong le litšila tse ka ntle tse ka 'nang tsa silafatsa tsamaiso ea lipeipi.Mefuta e fapaneng ea boholo le litlhaloso tse fumanehang bakeng sa li-caps tsa ho qetela tsa liphaephe tsa PVC, ho tloha ho 20mm ho ea ho 400mm, li bontša boitlamo ba rona ba ho fa basebelisi monyetla oa ho khetha litekanyo tse loketseng ka ho fetisisa ho latela litlhoko tsa bona tse khethehileng le litlhoko tsa morero.

Ho tšepahala, ho hanyetsa ho bola, le ho hanyetsa ho senyeha ha liphaephe tsa rona tsa PVC ho etsa hore li batloe haholo lits'ebetsong tse fapaneng, ho kenyelletsa le merero ea phepelo ea metsi malapeng, merero ea kaho ea lipeipi tsa metsi, le merero ea lipeipi tsa nosetso tse baballang metsi.Ho kenya li-pipe caps tsa PVC ke mokhoa o hlophisitsoeng, o atisang ho finyelloa ka mekhoa e kang socket joint, solvent weld joint (SWJ), ho kopanya samente, flanging, joalo-joalo Mekhoa ena ea ho kenya e tiisa hore ho na le tšireletso e sireletsehileng le e tiileng qetellong ea pipeline, ho finyella maikemisetso a mabedi a ho tiisa le ho tshireletsa.

Mokhoa ona o otlolohileng oa ho kenya ha o ntlafatse ts'ebetso ea morero feela empa o fokotsa nako ea ho kenya le litšenyehelo tsa basebetsi, o kenya letsoho haholo ho ntlafatsa katleho ea moruo oa morero le ho boloka tekanyetso.Tšepa boitseanape ba Jiangyin Huada ba ho fana ka liphaephe tsa PVC tse ipabolang tšebetsong le ho ts'epahala, ho fihlela litlhoko tse thata tsa maemo a fapaneng a ts'ebeliso.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lintlha tsa motheo

Lebitso: PVC end cap

lintho tse bonahalang: PVC (100% virgin material)

Boemo ba khatello: 1.0MPa, 1.6Mpa

Ho kopanya: socket, solvent welding (SWJ), ho kopanya samente, flanging, joalo-joalo.

'Mala: o mosoeu, o moputsoa (ts'ebetso ea 'mala oa tšehetso)

Maemo: ISO4422, GB/T 5836.2-2006

Lebitso: Leoatle le Lecha la Khauta

Sebaka sa tsoalo: Jiangsu, Chaena

Lintlha tsa Sehlahisoa

Boima: 1.35 ~ 1.46gcm³

Mocheso o sebetsang: (-20)° c ~ +110°c

Vicat nolofatsa mocheso: ≥80 ℃

Ho fokotseha ha longitudinal: ≤5%

Teko ea ho theola hamore: 0℃TIP≤5%

tlhahlobo ea hydrostatic: ha ho na ho phatloha, ha ho na ho lutla

Teko ea tiiso ea khokahano: ha ho phatlohe, ha ho dutla

Teko ea shading: leseli-proof

Litaba tsa VCM: ≤1mg/kg

Matla a Flexural (Mpa): ≥36

Qetellong Cap
Tlhaloso mm
20
25
32
40
50
63
75
90
110
125

Qetellong Cap
Tlhaloso mm
140
160
180
200
225
250
280
315
355
400

Melemo ea lihlahisoa

1. Bokhabane ba ho Itloaetsa:
Jiangyin Huada e fana ka mefuta e fapaneng ea boholo ba sehlahisoa, mebala le litlhaloso, e lumellang khetho e ikhethileng e ipapisitseng le litlhoko tse ikhethang.Ho feta moo, ts'ebetsong ea mekhoa e tloaelehileng le e sebetsang ea ts'ebetso e nolofatsa haholo ts'ebetso ea ho kenya, ho fokotsa haholo nako ea kaho.
2. Moralo o Matla bakeng sa Botsitso bo Phahameng ba Khatello:
Lisebelisoa tsa lipeipi tsa PVC tse entsoeng ke Jiangyin Huada li na le mohaho o bonolo empa o le matla o khonang ho mamella khatello e phahameng, ho netefatsa botsitso le botšepehi ba likhokahano tsa lipeipi tsa PVC.Re tsitlallela boitlamo ba rona ba ho fana ka litharollo tsa boleng bo holimo, tse khethehileng bakeng sa likopo tse fapaneng.

3. Mahala Khohlano:
Motsoako oa likhohlano oa liphaephe le lisebelisoa tsa PVC li nyenyane, metsi a phallang a boreleli, ha ho bonolo ho thibela, 'me mosebetsi oa tlhokomelo o monyenyane.Bokaholimo ba liphaephe tsa PVC bo boreleli ebile bo na le khanyetso e tlase ea mokelikeli.Tlas'a bophara bo lekanang, tekanyo ea phallo e kholoanyane 'me ha ho na tekanyo e khomarelang eona.