PVC 90 Degree Elbow

Tlhaloso e Khutšoanyane:

E entsoe ka 100% polyvinyl chloride (PVC), setsoe sa Jiangyin Huada sa 90-degree e ka ba karolo e sebelisoang haholo lits'ebetsong tsa liphaephe tsa PVC.Mofuta ona oa thepa o ithorisa ka ho hanyetsa kutu, ho hanyetsa le ho hanyetsa lik'hemik'hale.Lintho tsa eona tse bobebe le tse matla haholo li etsa hore e ikamahanye le maemo a fapaneng a tikoloho, ho fumana lits'ebetso tse ngata ho tsa kaho, temo le ho feta.Phaephe ena e kentsoeng e entsoe ka angle ea 90-degree, e thusang ho fetola tsela e bonolo ea phallo ka har'a tsamaiso ea liphaephe.Litekanyo tsa eona li khomarela boholo bo tloaelehileng ba ISO 'me e na le moralo o lekanang oa bophara, ho netefatsa hore bophara ba liphaephe tse kholo le tsa makala lia tšoana.Sena se felisa lebelo la mokelikeli o sa lekaneng nakong ea ho chencha, ho fokotsa tahlehelo ea khatello le ho netefatsa hore mokelikeli o phalla ka har'a liphaephe, o kenya letsoho ho ntlafatsa ts'ebetso ea ts'ebetso le ho tšepahala.Ho feto-fetoha ha moralo oa PVC 90-degree elbow e lumella litokiso tse ipapisitseng le litlhoko tse ikhethileng, ho amohela bophara ba liphaephe tse fapaneng le maemo a ts'ebeliso, le ho fa basebelisi khetho le boiketlo bo eketsehileng.Ho sa le joalo, ka lebaka la litšobotsi tsa thepa ea PVC, ho kenngoa ha setsoe sa PVC 90-degree ho otlolohile.Ha ho na lisebelisoa tse khethehileng tse hlokahalang, 'me lisebelisoa tsa liphaephe li ka kenngoa habonolo ka motsoako oa socket, solvent weld joint (SWJ), ho kopanya samente, flanging kapa mekhoa e meng e tloaelehileng ea ho hokahanya, ho fokotsa haholo bothata ba ho kenya le litšenyehelo.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lintlha tsa motheo

Lebitso: PVC 90-degree elbow

lintho tse bonahalang: PVC (100% virgin material)

Boemo ba khatello: 1.0MPa, 1.6Mpa

Ho kopanya: socket, solvent welding (SWJ), ho kopanya samente, flanging, joalo-joalo.

'Mala: o mosoeu, o moputsoa (ts'ebetso ea 'mala oa tšehetso)

Maemo: ISO4422, GB/T 5836.2-2006

Lebitso: Leoatle le Lecha la Khauta

Sebaka sa tsoalo: Jiangsu, Chaena

Lintlha tsa Sehlahisoa

Boima: 1.35 ~ 1.46gcm³

Mocheso o sebetsang: (-20)° c ~ +110°c

Vicat nolofatsa mocheso: ≥80 ℃

Ho fokotseha ha longitudinal: ≤5%

Teko ea ho theola hamore: 0℃TIP≤5%

tlhahlobo ea hydrostatic: ha ho na ho phatloha, ha ho na ho lutla

Teko ea tiiso ea khokahano: ha ho phatlohe, ha ho dutla

Teko ea shading: leseli-proof

Litaba tsa VCM: ≤1mg/kg

Matla a Flexural (Mpa): ≥36

Setsoe 90 °
Tlhaloso mm
20-90 °
25-90 °
32-90 °
40-90 °
50-90 °
63-90 °
75-90 °
90-90 °
110-90 °
125-90 °

Setsoe 90 °
Tlhaloso mm
140-90 °
160-90 °
180-90 °
200-90 °
225-90 °
250-90 °
280-90 °
315-90°
355-90 °
400-90 °

Melemo ea lihlahisoa

1. Ts'ebetso e Tšoarellang: Ho hanyetsa Tšusumetso le Bophelo bo Bolelele

Lisebelisoa tsa lipeipi tsa PVC tse tsoang Jiangyin Huada li bonts'a khanyetso e matla le matla a tsitsitseng, a khonang ho mamella khatello e matla le matla a ho kobeha.Sena se tiisa hore lisebelisoa li lula li sa senyeha ka nako e telele ea tšebeliso, ka tebello ea bophelo e fetang lilemo tse 50.

2. Thepa e Silafatsang Moruo le Tikoloho: Kenyelletso e Nolofalitsoeng

E entsoe ka thepa ea PVC e nang le moruo le tikoloho, lipeipi tsa PVC tsa Jiangyin Huada li kenya letsoho lits'ebetsong tse nolofalitsoeng tsa ho kenya.Mekhoa ea ts'ebetso e otlolohileng le e potlakileng e ntlafatsa katleho le katleho ea kaho, e lebisang ho bolokeng thepa le ho fokotsa litšenyehelo tsa ho kenya.

3. Tloaelo e Felletseng: Boholo, Mebala, le Lintlha

Jiangyin Huada e fana ka liphaephe le lisebelisoa tsa PVC ka mefuta e mengata e fapaneng ea boholo, mebala le litlhaloso, e lumellang khetho e hlophisitsoeng ho latela litlhoko tse khethehileng tsa morero.Mekhoa ea ts'ebetso e otlolohileng le e potlakileng e nolofatsa ts'ebetso ea ho kenya, ho netefatsa ho ikamahanya le maemo ho likopo tse fapaneng.

4. Tumellano ea Bophelo bo Botle le Tšireletseho: Tlatsetso-Mahala le Bohloeki

Liphaephe le li-fittings tse tsoang Jiangyin Huada ha li na li-additives tsa heavy metal, ha li khone ho phahama, 'me ha li na libaktheria.Ho latela melao ena ea bophelo bo botle le polokeho ea linaha tse fapaneng le mekhatlo ea machaba e netefatsa tikoloho e hloekileng le e hloekileng.

5. Phihlelo e le 'ngoe ea ho reka ka mokhoa o le mong: Mefuta e mengata e fapaneng ea ho Matching Pipe Fittings

Jiangyin Huada e fa bareki khetho e fapaneng ea liphaephe tse lumellanang hantle le liphaephe.Ka mefuta e fapaneng e felletseng ea mefuta le boholo, bareki ba ka natefeloa ke boiphihlelo bo bonolo ba ho reka ntho e le 'ngoe, ba nolofatsa mokhoa oa ho reka.